Description: ;;;; This;Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased.;The tension puller works well with a tap down hammer when pulling large dents.;It's very easy to control, everyone can removal the dent easily by yourself. Features: 1.;Slide hammer is more powerful for dent repair, conquer big dent.;;;; 2. The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent. 3. Big dent needs slide hammer or puller; small dent needs mini dent lifter or pulling bridge. 4. Different tabs for different dent lifter or the Slide hammer, works with all glue pullers. 5. Use a slide hammer or dent lifter or any pulling tools lift the dent, try many times. Specifications: Number of Pieces: 19 (1pc T-Bar + 18 pcs Puller Tabs) ;Color: Silver + blue Type:;Paintless Dent Repair tool set Package Weight: 1250g Function:;Paintless dent removal How to use: 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket.; 4. Pull the trigger and apply the drawing gasket with extruded glue; 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres; 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth. Packing lncluded: 18x Paintless Dent Repair Glue Pulling Tabs 1x 2 in 1 Dent Removel T Bar Tools