Type : Hammers Type : Combination Type : Dent Removal Dent Puller Tabs DIY Supplies : Electrical Package : Case Application : Household Tool Set Size : 40cm*10cm*10cm Function1 : Auto body repair tools Function2 : Paintless dent removal hand tool set Function3 : Car Dent Repair Tools Function4 : Car body dent repair PDR Tools kit Application : pdr tools paintless dent repair Function 5 : Paintless Dent Repair Tools Function 6 : Tools for dent Function 7 : paintless dent removal tools Function 8 : Straighten the dents Function 9 : Dent Removal Specification color:as picture size:as the picture shows weight:1750g/3000g glue gun plug:US/EU/UK/Car Charger Plug working voltage:100V-240V/12V capacity：20W Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It?s easy to pops a dent with the detailed repair steps described in the manual. Also, you can contact us if there is any question, we are always on Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money. How to use the pdr tools ？ 1. Clean damage surface with a clean wet cloth; 2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes; 3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is); 4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 6. When dent was removal, clear the glue by alcohol with plastic shovel; 7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.