Description Sealer trim is the perfect choice as the no-mess alternativer to tubes and cartridges.our decorative trim with butyl adhesive backing is easily applies in most areas requiring a caulk application.caulk strip is long lasting mildew-resistant 100% waterproof and guranteed to last 10 years. Material:LDPE Butyl rubber Size:1.25inchX4.92FT(3.2cmX1.5m) (approx.) Color:White NOTE 1.Due to the light and screen setting difference, the item's color may be slightly different from the pictures 2.it may have 1-3mm/0.03-0.11inch in error/1-3cm in error Features 100% brand new and high quality Caulk Stick is an easy alternative to traditional caulk. It is designed to create a tight seal between the bathtub and floor or wall to keep moisture out. 1.Waterproof and oil-resistant 2.Made of good quality LDPE material, waterproof, moisture proof, mildew proof, environment friendly adhesive 3. More Flexible and soft Package contents 1or 2 * Self-adhesive Sealing Strip WARNING 1.Thoroughly clean surface with scouring powder to remove all residues. Rinse with water. Complete surface preparation by wiping previously caulked areas with rubbing alcohol. 2. During installation, always keep strip folded against surfaceata90 degree angle. 3. Avoid stretching or pulling product during installation. APPLICATION 1.Start with longest caulk strip. Without removing film backing, place one end of pre-bent strip in corner of tub. 2. Peel a small section of film backing from top half of strip. Start at corner of tub and press top half of strip firmly to wall. Work in small sections at a time. 3. Continue to slowly pull off film while pressing strip firmly to wall until entire top half of strip is adhered. 4.Repeat process for bottom half of strip. Press bottom half of strip firmly against floor to complete installation. 5. Prevent water contact with caulk for a minimum of 12 hours after installation.