Package included: 69900mAh Simple Version 1 x Car Jump Starter 2 x Battery clip 1 x 2 in 1 Mobile Phone connectors 1 x User Manual 99900mAh Upgrade Version Package included: 1 x Car Jump Starter 1 x Power Adapter 1 x Car Charger 2 x Battery clip 1 x 4 in 1 Mobile Phone connectors 8 x Laptop connectors 1 x Laptop Adapter Cable 1 x User Manual Description: Color: Black Material:ABS Capacity: 69900 mAh Service temperature:-30℃-80℃ USB output: 5V/2A Input current: 5V/2A Three light mode:LED torch,SOS,LED explosion-flashing Cycle life: More than 2000 times Size :160*80*25mm/6.29"*3.14"*0.98" Starting current: 200A Peak current :400A Color: black and Red Material:ABS Capacity: 99900 mAh Service temperature:-20℃-60℃ USB output: 5V/1A/2A Input current: 5V/1A Three light mode:LED torch,Red and blue lights,SOS,LED explosion-flashing Cycle life: 3-5 Years Size mm:175*90*40mm/6.88"*3.54"*1.56" Applicable vehicle type:Gasoline car 4.5L，Diesel engined car 3.5L Starting current: 400A Peak current :800A Features: 1.Waterproof and dustproof 2.The battery capacity is large, durable and safe 3.Small size, slim and easy to carry 4.Low temperature resistance, high temperature resistance 5.Providing power to the car, starting the car in a flash, simply solving the dilemma 6.No need to install, no need to set up, just use a clip to connect the car positive and negative, Four practical functions: 1. Instantly start the car, safety and emergency necessities 2. Super bright LED flashlight, with flash mode, can convert SOS emergency mode 3. Temperature protection, short circuit protection, constant voltage protection, constant current protection, over charge protection, over discharge protection, balance protection, magnetic field protection Instructions: 1. Confirm that the host battery indicator is more than 3 2. Insert the battery cable connector into the car's car interface 3. Clamp the red clip to the "+" pole of the battery, and the black clip clamps the battery "-" pole 4. Turn the car switch to the "START" position 5. After the car starts, remove the clip 6. Pull the clip off the main unit Note: 1.Due to the shooting and screen resolution reasons, there are some differences between the picture color and the object, please take the object as the standard. 2.When charging the jump starter, please turn the button to ON position,make it become power on state. 3.The middle two are white lights，and the next two are red and blue light. 4 LED lamp operation steps: Switch to the ON position,Long press the round button, the middle two LED will be on；Long Press the round button again，the two LED will be off.Double clicking the round button, SOS red and blue lights will be on.