Type:wallpaper Material: PVC Style: Simple And Modern Features: Waterproof, Decorative, Beautify Application: Wall Desktop Door Bedroom Living Room Bedroom, Etc. Any Smooth Surface Color: Matte-Black, Matte-Dark Gray, Matte-Light Gray, Matte-White, White Grid, Black Grid, Dark Gray Grid, Silk Black, Silk Silver, Linen- Medium Grey , Linen-Light Grey Size: 100*60cm How to stick self-adhesive wallpaper? 1. Before brushing the wallpaper, brush the wall to be attached with a brush, pay attention to the dryness of the wall, avoid the effect of dust and moisture on the paste. If the wall is not flat, there is a hole, you must use the soil to make up, then scrape And there are ready tools, some of which are available when you buy wallpapers. 2, use the ruler to measure the height of the wall to be affixed to the wallpaper, and then start cropping the wallpaper. When cutting the wallpaper, try to keep about 5 cm per side, which is convenient for later processing in the corner. Note that if there is a pattern on the wallpaper, pay attention to the splicing of the late flower line. 3. After the wallpaper is cut, you can pour the base film into the bucket, mix it with water, and then spread the base film evenly on the wall. Pay attention to the wall's disintegration. 4. Pasting is a relatively important step. When pasting, it starts from one side of the wall and sticks in one direction. The first wallpaper is generally attached to the door edge, and then the adhesive paper is pasted from the top to the bottom. When pasting, the scraper is scraped laterally from one side to the other side to remove the gas below. Separate the paper when it is separated, otherwise it will be easy to appear bubbles when catching the gas. Make the wallpaper flat against the wall. Then cut off the excess wallpaper at the top and bottom ends. After all the wallpapers are attached, it is OK to completely wipe the glue remaining on the surface of the wallpaper with a sponge and water. 5. After the wallpaper is pasted, the edges around the wallpaper need to be cropped. After leveling with the bezel, cut it with a wallpaper knife. Pay attention to the cropping of the wallpaper part at the door and window and the power switch.