Features: 1.The engine ECU won’t run the engine until it receives a coded message (a ‘unique’ number) from the immobilizer. 2.The ‘unique’ part means that every immobilizer is different, and so swapping immobilizers won’t help get a car running. 3.There is no starter motor cut on Renault models. 4.The immobilizer may be a stand alone unit, or it maybe built in to a larger control unit. 5.Once the ecu has been decoded, the emulator should be fitted as shown, this can be done direct to the ecu or along the immobilizer wiring loom. 6.After connecting the emulator cut the immobilizer line from the immobilizer unit as shown. Fitting Process: 1. Ensure that the ecu has been decoded. This can be done with the Renault ecu decoder 2. Connect the module to the car’s wiring harness: Red wire to ignition feed, black wire to earth, and yellow wire to the data wire 3. Cut the wire to the immobilizer, so that the module is connected directly to the engine ECU, and the immobilizer is out of the circuit. 4. Turn ignition back on, the car should now start. Package include: 1x Renault Immo Emulator